Publicité
Les langues disponibles
Les langues disponibles
English
Press the
to enter the "hour" mode with the
0~23.
Press the
to enter the "minute" mode with the
0~59.
Press the
again to exit the SET mode.
Press the
to exit the mode.
Warning: Press
to exit the mode and without having the setup value
reserved.
If the battery is not installed, the battery is low, or the battery is out of the
compartment for over 30 minutes, date and time will resume the default value when
the device is reactivated.
5.4 Alarm On/Off
Alarm pause
The power on setup is with an alarm sounded to remind that the value exceeds the
alert threshold.
Press
to have
appeared on the screen and it is without a warming sound
in 2 minutes when it exceeds the alarm setup and the alarm will be reactivated after
2 minutes.
Alarm off
Press
for 2 seconds and
once every second that means no alarm will be sounded while the value exceeding
the default
Press
for 2 seconds and
the alarm will be sounded while the value exceeding the default.
Please be aware of this setup.
For probe failure, the alarm off or pause setup will be off automatically and
the alarm will sound automatically.
The alarm setup is on while the unit is turned on.
12
or the
in the range of
or the
in the range of
will appear on the screen and
will flicker
icon will disappear from the screen that means
Publicité
