Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Press the
and the following values appear:
Current value (30)→(10)→(5)→(0), stay unchanged from this point on and press
the
to enter the sound control mode.
Press the
to exit the mode with having the default value saved.
Sound volume control
For the control of sound volume, the
adjustment is not needed, press
the setup mode.
The default sound volume is shown as
Press
or
for adjustment.
Press
to show the following values:
For example:
Current value
(small volume) →
further change, press
to exit the setup mode or to enter time setup.
Press
to show the following values.
For example:
Current value
(large volume) →
further change, press
to exit the setup mode or to enter time setup.
The setup of sound volume will be signaled with a beep for 1 seconds except for
Model the setup of mute (
).
Press the
to exit the mode with having the default value saved.
Time setup
The time setup mode starts out with the "year," "month," "date," "hour," and
"minute" by pressing the
. If no setup is needed, wait for 10 seconds to exit the
mode automatically. The default date of the device is at 0 hour 0 minute on January
1, 2000.
Setup the "year" first by pressing the
last two digits of the year).
Press the
to enter the "month" mode with the
1~12.
Press the
to enter the "date" mode with the
1~31.
11
icon flickers once every second. If
to enter time setup or wait 10 seconds to exit
.
(large volume), remains at
without
(small volume), remains at
without
or the
in the range of 01~99 (the
or the
in the range of
or the
in the range of
Publicité
Table des Matières
