Publicité
Les langues disponibles
Les langues disponibles
English
8. Problem shooting
Dysfunction and resolution
On the screen means probe dysfunction.
● Be sure that the probe is connected to the device correctly.
● Use only Apex's probe or Solaris S100A probe with the device.
Low battery:
Please replace the battery
Switch On failure:
● Check the power of battery.
● Check the placement of battery.
● Return to manufacturer for calibration.
Cleaning
Surface cleanings is by using a soft cloth dampened with either a commercial,
non-abrasive cleaner or a solution of 70% isopropyl alcohol in water, and lightly
wiping the surfaces of the oximeter.
Note: Please switch off pulse oximeter before cleaning.
Clean the SpO
probe, LED and photo-sensor with moist cloth or cotton ball and
2
alcohol gently.
The aforementioned general cleaning process is not for infection prevention. Please
contact the specialist for the process of contagious infection.
Disposal
Used batteries should not be disposed of in the household rubbish. Batteries
should be deposited at a collection point for used batteries.
At the end of its life, the appliance should not be disposed of in household
rubbish. Enquire about the options for environment-friendly and appropriate
disposal. Take into account local regulations.
17
Publicité
