Taurus BAPI 800 INOX Mode D'emploi page 14

English
Blender-Mincer
Bapi 800 Inox
Bapi 800 Plus Inox
Dear customer,
Many thanks for choosing to purchase a TAURUS brand product.
Thanks to its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life can be
assured.
Description
A Speed control
B Button
C Driving motor
D Whisk
E Measuring cup
F Adapter fitting (*)
G Whisk (*)
H Goblet (*)
(*) Only available in the model Bapi 800 plus Inox
If the model of your appliance does not have the accessories described above,
they can also be bought separately from the Technical Assistance Service.
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance and
keep them for future reference. Failure
to follow and observe these instructions
may result in an accident. Failure to
follow and observe these instructions
may result in an accident.
- Clean all the parts of the product that
will be in contact with food, as indicated
in the cleaning section, before use.
- This appliance must not be used by
children. - Keep the appliance and its
cable out of reach of children.
- - This appliance can be used by
people unused to its handling, disabled
people if they have been given supervi-
sion or instruction concerning use of the
appliance in a safe way and unders-
tand the hazards involved.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- The blades are sharp and there is a
risk of being cut. Proceed with cau-
Manual Bapis 800 Inox_Plus Inox.indb 14
tion and avoid direct contact with their
edges.
- Be especially careful when handling
the blades during operations of as-
sembly and dismantling, emptying the
goblet and cleaning.
- Always disconnect the appliance from
the mains if left unattended and before
assembly, dismantling or cleaning.
- Disconnect the appliance and unplug
the mains before changing the ac-
cessories or nearby moving parts that
move during use.
CAUTION: In order to avoid a hazard
due to inadvertent resetting of the
thermal protector, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
- If the mains connection is damaged, it
must be replaced. Take the appliance
to an authorised Technical Assistance
Service In order to prevent any danger,
do not attempt to dismantle or repair it
yourself.
- Ensure that the voltage indicated on the nameplate matches the mains voltage
before plugging in the appliance.
- Connect the appliance to a base with an earth socket withstanding a minimum
of 10 amperes.
- The appliance's plug must fit into the mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- Keep the working area clean and well lit. Cluttered and dark areas invite
accidents.
- Keep children and bystanders away when using this appliance.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if there are visible signs of
damage or if it has a leak.
- Do not use the appliance with damp hands or feet, or when barefooted.
- Do not force the electrical wire. Never use the electric wire to lift up, carry or
unplug the appliance.
- Do not wrap the cable around the appliance.
- Check the state of the power cord. Damaged or tangled cables increase the
risk of electric shock.
- Do not use or store the appliance outdoors.
- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting the appliance involuntarily.
- Do not touch any of the appliance's moving parts while it is operating.
23/6/15 18:46