HQ Power CLLS04 Notice D'emploi page 5

Damage caused by user modifications to the device is not covered by
the warranty.
Only use the device for its intended purpose. Using the device in an
•
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is
•
not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Overview
4.
Refer to the illustration on page 2 of this manual.
1 power switch
2 transformer
3 controller
Use
5.
Refer to the illustrations on page 2 of this manual.
• Fix the metal mounting clip in the desired location.
• Press the LED strip in the mounting bracket.
• Led strips [6] can be connected either to each other (series) or
directly to the distribution box [4]. When connecting to the
distribution box, use an included strip cable [5].
Note: to create different effects, consider purchasing connection
accessories as shown on page 3 (not included).
• Plug the power plug into a suitable mains outlet and switch the LED
strips on with the power switch [1].
• Press the button on the controller [3] until the desired lighting effect
is reached:
1x auto colour change
2x 7 colour slow flash
3x 7 colour quick flash
4x fixed colour red
5x fixed colour blue
Technical Specification
6.
input voltage
output
dimensions
26.04.2011
LED strip (4x)
connection cable (4x)
distribution box
controller
adaptor
CLLS04
4 distribution box
5 strip cable
6 LED strip
6x
fixed green
7x
mixed red + blue
8x mixed red + green
9x
mixed blue + green
10x
fixed white
220‐240Vac / 50Hz
12Vdc / 2A max. / 24W
250 (L) x 10 (W) x 8 (H) mm
2.50m
65 x 36 x 15mm
73 x 45 x 18mm
125 x 46 x 32mm
5 ©Velleman nv