Teuco 629 Instruction Pour Le Montage page 11

INSTRUCTIONS FOR INSTALLATION Art.
The product must be installed exactly as supplied by Teuco, otherwise warranty will be invalidated.
The directions for installation must be observed to the letter, as must those concerning recommended materials and the
accessories supplied with the product.
electrical connections must be carried out in compliance with national safety regulations, as indicated in the preinstallation data sheet.
This manual constitutes an integral part of the product and must be kept for future reference.
Data and specifications indicated are not binding on the company: Teuco Guzzini SpA reserves the right to make such changes
as are deemed appropriate without prior notice and without any obligation to update.
This product is intended for home use. In the event of a Teuco minipool being commissioned for public use, procurement
managers must ensure compliance with all statutory regulations governing safety, water treatment and utility systems normally in
force in the country of installation.
OPenInG THe PACKInG AnD
3
HAnDLInG THe MInIPOOL
Remove the crate and packing, leaving the minipool
on the pallet.
Whatever transport and handling operations are
involved, use only the pallet on which the
minipool is packed for shipment.
THe MInIPOOL MusT never Be LIFTeD FuLL
OF WATER
FITTInG THe CAnvAs
4
Secure the straps of the canvas to the panels of the
minipool with the screws provided (see illustration).
The canvas must be held down with the straps and,
if necessary, locked for added security.
The cover is not intended to carry weights.
Do not sit, step or lie on the cover.
Do not place objects on the cover.
La copertura non fissata o non chiusa The
canvas can be dangerous if not secured or
properly closed.
Failure to follow the instructions for securing
the canvas can result in danger to the user.
Remove the canvas completely before stepping
into the pool, otherwise there is a risk of being
trapped.
PLUMBING CONNECTIONS
5
DRAIN CONNECTION
The Teuco minipool has a drain valve.
Connect the valve to the main drain by way of a trap
(see preinstallation data sheet - step 2).
FILL CONNECTION
The recommended method of filling the Teuco
minipool is to use a hose (taking care not to
immerse the end as this could cause a reflux of
water back into the main).
WARNINGS
ELECTRICAL CONNECTIONS
6
Remove the inspection panel, undoing the screws
a
as indicated.
6 Make the connection to the a.c. power supply at the
b
terminal box (D) provided on the minipool.
Electrical connections must be made in compliance
with safety regulations, as indicated in the
preinstallation data sheet (step 2).
The size of the power cable and the relative clamp
must be selected according to the current load,
the distance from the junction box and the way the
cable is laid and routed.
The jobs of holing the terminal box and selecting
and fitting the IPX5 clamp are the responsibility of
the installer.
Having made all the connections, check that the
system operates correctly (see user manual -
STARTING UP FIRST TIME).
CAuTIOn: POWer uP THe eLeCTrICAL
eQuIPMenT OnLY AFTer THe MInIPOOL HAs
Been FILLeD WITH WATer.
Refit the inspection panel to the minipool, lining up
the holes in the panel with the holes in the frame.
629
GB
11