Product Description; Technical Data - Abicor Binzel SR-ABITIG GRIP Mode D'emploi

®
SR/ABITIG GRIP

3 Product description

WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.

3.1 Technical data

Welding
Transport and storage
Relative humidity
Tab. 1
Type of voltage
DC polarity of the electrodes
Type of use
Voltage limitation
Max. arc ignition and stabilization voltage
Breakdown voltage 50 Hz
Protection type of the machine-side
connections (EN 60 529)
Shielding gas (DIN EN ISO 14175)
Electrode
Tab. 2
Switching voltage of button
Switching current of button
Switching power of button
Breaking capacity of potentiometer
Tab. 3
BAL.0047 • 2019-06-19
Ambient conditions during operation
General torch data (EN 60 974-7)
Electrical control devices
3 Product description
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC or AC
Usually negative
Hand-held
113 V peak value
10 kV
IP3X
Argon
commercially available tungsten
electrodes suitable for TIG use,
preferably low-radiation
0.02 - 42 V (DC and AC)
0.01 - 100 mA
max. 1 W (resistive load)
linear 1 W at 40 °C
EN - 5