Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
®
SR/ABITIG
GRIP
3.2 Signs and symbols used
The following signs and symbols are used in the operating instructions:
Symbol Description
•
1
4 Putting into operation
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorized persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorized persons.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Note of the following instructions:
3 Product description on page EN-5
4.1 Setting up the torch body
CAUTION
Risk of injury
Puncture or cut-in wounds may be caused by the wire electrode.
• Keep your hands out of the danger zone.
• Wear the correct protective gloves.
BAL.0047 • 2019-06-19
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
4 Putting into operation
EN - 7
Publicité
Table des Matières
