Publicité
PIECES DETACHEES
Pièces détachées: Il en existe plusieurs, une liste les décrivant est disponible sur
demande.
FR
DUREE DE VIE
Eléments
Écran intérieur
Écran extérieur
Cales confort en T et cale confort de
nuque
Ensemble jugulaire
Oreillettes de confort
Coque
Calotin
Fréquences données pour une utilisation normale et une base de
200 heures / an et en fonction de l'état de l'élément.
Tous les modèles, accessoires et pièces détachées sont scrupuleusement vérifiés
avant leur sortie d'usine.
Les casques MSA et les accessoires sont garantis 12 mois, pièces et main-d'œuvre
à compter de la date de livraison à l'acheteur, pour toute défaillance pouvant
survenir lors d'une utilisation dans des conditions décrites dans cette notice.
Vous bénéficiez, en tout état de cause, de la garantie légale pour défauts et vices
cachés dans les conditions prévues aux articles 1641 et suivants du Code Civil.
13
Tous les...(à titre indicatif)
5 à 8 ans selon l'état
5 à 8 ans selon l'état
2 à 3 ans selon l'état
2 ans selon l'état
2 ans selon l'état
10 ans
5 ans
GARANTIE
WARNING
Thank you for placing your trust in MSA products.
Please read these instructions carefully before using your helmet.
Failure to observe these instructions could reduce the amount of protection your
helmet provides.
Your helmet will only provide maximum protection if all of the MSA components are used
with it. Furthermore, any change made to your helmet or failure to use one of the
original helmet components will imply improper use of the equipment, and will
discharge MSA of any liability.
In an ongoing effort to improve its products, MSA hereby reserves the right to alter them
at no notice.
To guarantee sufficient protection, the helmet must be adapted and adjusted to the
wearer's head size.
Your helmet is designed such that the pressure built up when it is knocked is
absorbed by the partial destruction or damage to the outer and inner cap; even if
such damage is not immediately apparent, we recommend replacing any helmet
which has taken a considerable impact.
The user's attention is also drawn to the dangers of modifying or removing any of
the original components of the helmet, apart from any modification or removal
recommended by the helmet manufacturer. Under no circumstances should
helmets be adapted for attachment of accessories by any means not recommended
by the helmet manufacturer.
Do not apply any paint, solvents, adhesives or self-adhesive labels, other than
those recommended by the helmet manufacturer's instructions.
Checks should be made following any apparent impact, carried out by our
maintenance department or a specialist.
GENERALITIES
The MSA LH 350 flying helmet is designed only for helicopter pilots and crew members. It
ensures a maximum comfort and protection.
Available in three sizes to fit head measuring between 52 cm to 64 cm. It incorporates two
visors; and could receive a wide range of communication systems and Night Vision
Goggles supports, available to order. Please contact us for details.
Each helmet is individually serial numbered to ensure correct identification of the helmet
and a correct record of the service life history of the helmet.
EN
14
Publicité
