GEZE TS 5000 R-ISM BG Mode D'emploi page 19

TS 5000 R-ISM BG
6.9 Adjusting trigger and block
Ensure that the wire cable is not pinched.
X
When adjusted correctly, the disc and the notch must be aligned.
Measure distance between disc and
X
notch (1.).
Tension wire cable by "X"
X
one rotation of set screw =
approx. 1 mm distance
Secure setting with lock nut (3.).
X
6. 1 0 Mount sliding lever to moving leaf and connect with sliding block
Mounting of the sliding lever to the mov-
ing leaf occurs in the same manner as with
the fixed leaf (see Section 6.8).
6. 1 1 Positioning the function saveguard of the integrated closing sequence control
1.
Pull out driver as far as possible (1.).
X
Loosen screws of stop rod (max. ½ rotation) (2.).
X
+
(2.).
3.
2. (~½ )
6.
-
"X"
1.
Mounting and securing
-
+
2.
3.
Fig.: 6.9.1
Fig.: 6.10.1
4.
5.
GF
Fig.: 6.11.1
GB 8