GEZE TS 5000 R-ISM BG Mode D'emploi page 16

Mounting and securing
Use cable protection for the 230 V cable when leading through plaster.
Insert the 230 V cable/cable for additional connections protruding from the wall through the
respective openings of the smoke detector housing!
Guide 230 V power cable through smoke detector housing and shorten to approx. 80 mm (1.).
X
Align smoke detector housing and screw it firmly to moving-leaf guide rail and frame (2.).
X
6.4 Connecting 24 V fixed-leaf cable
Red ='+'
White = '–' .
Route 24 V fixed-leaf cable of electrical hold-open device in the upper guidance of the smoke detector hou-
X
sing and to the supply terminal. Secure cable with adhesive tape if necessary (1.).
Shorten excess cable to approx. 40 mm (2.).
X
Connect cable to terminal (3.).
X
6.5 Mains connection
Fuse the on-site mains connection with a B10 fuse.
X
Place (2.) the mains cable provided on site on the terminal and connect (3.).
X
Place (4.) the 230 V supply line of the power pack starting from the terminal and stow away extra length in the
X
power pack.
Close and screw on cover of smoke detector housing (5.).
X
GB 5
TS 5000 R-ISM BG
M5x45/5x55
Fig.: 6.3.1
Fig.: 6.4.1
Fig.: 6.5.1