B-510Pol-I - Optika Italy B-510 Serie Manuel D'utilisation

10.2

B-510POL-I

Set the main switch to "I" and adjust light intensity.
Set the Bertrand lens ring on "O"
Insert analyzer into the light path
Set on "T" the light path selector on the reflected
Insert 10x objective into the light path
Remove the sample from the optical path and check
for light extinction
Focus the specimen
Adjust aperture and field diaphragms
Insert in the light path the desired objective and
focus the specimen
Begin observation
light illuminator
Adjust interpupillary distance
Adjust diopter
Center optical axis
Adjust brightness
(Used commands)
Main switch
Brightness adjustment knob
Bertrand lens
Analyzer
Reflected light illuminator
Nosepiece
Analyzer
Polarizer
Coarse and fine focus knobs
Binocular tube
Diopter adjustment ring
Condenser height adjustment knob
Condenser centering screws
Aperture diaphragm
Field diaphragm
Nosepiece
Coarse and fine focus knobs
Brightness adjustment knob
Page 20
(Chapter)
(9)
(5/9)
(12)
(12)
(12)
(5)
(12)
(12)
(5)
(9)
(9)
(9)
(9)
(9)
(9)
(5)
(5)
(5/9)