Stage; Dioptric Adjustment; Adjusting The Interpupillary Distance; Use Of Eye Shields - Optika Italy B-510 Serie Manuel D'utilisation

9.4

Stage

1. The rotating stage accepts specimens on slide
(B-510POL) or opaque specimens (B-510POL-I).
2. It is possibe to lock the specimen once placed on
the stage using the stage clips ①. (Fig. 21)
3. After loosing the locking screw ②, the stage can
be rotated by 360°.
9.5

Dioptric adjustment

1. Look into the right eyepiece with your right eye
only, and focus on the specimen.
2. Look into the left eyepiece with your left eye
only. If the image is not sharp, use the dioptric
adjustment ring ③ to compensate. (Fig. 22)
• The adjustment range is ±5 diopter. The number
indicated on the adjustment ring graduation
should correspond to the operator's dioptric
correction.
9.6

Adjusting the interpupillary distance

Observing with both eyes, hold the two eyepiece
prism assemblies. Rotate them around their common
axis until the fields of view coincide.
• The graduation on the interpupillary distance
indicator ④, pointed by the spot "." on the
eyepiece holder, shows the distance between
the operator's eyes. (Fig. 23)
The range of the interpupillary distance is 48-75mm.
9.7

Use of eye shields

• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded
eyeshields avoid scratching the lenses of eyeglasses.
(Fig. 24)
①
②
③
Page 16
④
F ig. 21 F ig. 21
F ig. 22 F ig. 22
F ig. 23 F ig. 23
F ig. 24 F ig. 24