Checchi & Magli DUAL 12 COMPACT Manuel D'utilisation Et D'entretien page 93

Replacing the ploughshare
1) Remove the circlip (A).
2) Unscrew the wing nut (B).
3) Lift and hold the clamping device
(D).
4) Push the share forwards and turn it so
it is facing downwards.
5) Hold the ploughshare and remove
the screw (C) and washer (E).
For the assembly, carry out the same op-
erations as for disassembly but proceed-
ing in reverse order.
NOTICE
During assembly, fit the Plant Control
device inside the ploughshare.
Make sure the flexible plate is centred
with respect to the share (see "Sym-
metrical adjustment of the flexible
plate with the ploughshare").
Scrapping the work vehicle
Scrapping operations must be handled by specialised
personnel with suitable skills for the job.
The components removed must be sorted according to
English language
INFORMATION CONCERNING REPLACEMENTS
UN41-0515MM
the type of materials they contain and in compliance
with the laws in force concerning "waste collection, sort-
ing and disposal".
43
D
C
E
B
A
8
Use and maintenance