Bartscher 120791 Mode D'emploi page 2

7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
PROBLEM
The device is switched
on, but does not heat up.
„Metal"-sound during
operation.
The device does not
generate any steam.
The foods are burnt
despite correctly set
baking/ cooking times.
If you cannot remove the malfunctions:
- do not open the body,
- notify the customer service point or contact the sales
agent, while providing the following information:

type of malfunction;

article and serial number (rating plate at the
rear of the device).
POSSIBLE CAUSES
 The device is plugged to
the power socket.
 Timer switch is not set.
 Temperature control is
not set.
 Fan is not set correctly.
 Not enough water in the
water tank.
 Fan is defective.
 Temperature control is
defective.
SOLUTION
 Connect the power plug
to an appropriate power
socket.
 Set the time.
 Set the temperature.
 Contact your retailer.
 Fill the water tank.
 Contact your retailer.
 Contact your retailer.
- 43 -