Publicité
Les langues disponibles
Les langues disponibles
Functions
1. Press Menu. Scroll to HS Settings.
Press Select.
2. Scroll to desired function e.g. Language.
Press Select.
3. Scroll to desired setting. Press Select.
Setting the sound level.
Audio Setup
The handset's ringer.
Ring Setup
Melodies 6-15 can continue for up to 8 seconds if the call is
answered in another phone.
Key tone, low battery, out of range.
Tone Setup
This is explained in the Connection section.
Language
The text shown in standby mode.
Rename HS
The background image in the display.
Wallpaper
The colour of the menus can be changed.
Colour Theme
The contrast in the display can be adjusted.
Contrast
The call is answered when the handset is
Auto Answer
lifted from the base.
See separate description.
Call Barring
Emergency numbers are excluded from
SOS Number
call barring functions.
Only used in systems with more than
Select Base
one base unit.
Resetting the handset
HS default
Call Barring
The telephone can block certain types of outgoing calls.
(PIN code is 0000 when supplied).
1. Press Menu. Scroll to HS Settings. Press Select.
2. Scroll to Call Barring. Press Select.
3. Enter PIN number (0000 when supplied). Press Ok.
4. Scroll to Barring Mode. Press Select.
5. Scroll to desired setting, e.g. On. Press Select.
Specifying barred numbers
Enter the sequence of digits for the type of call to be
barred. Example: Select the international prefix (usually
00) to bar all international calls. There are 4 different bars
with up to 4 digits in each.
1. Access Call Barring as described above.
2. Scroll to Barring Number. Press Select.
3. Scroll to desired entry. Press Select.
4. Enter desired digits (max 4). Press Ok.
5. Remember to activate the Barring Mode setting as
described above.
English
System settings
System PIN is 0000 on delivery.
1. Press Menu. Scroll to Base Settings.
Press Select.
2. Scroll to desired function. Press Select.
3. Enter the desired setting. Press Select.
Delete HS
Ring Setup
Dial Mode
Flash Time
Modify PIN
First Ring
BS default
Register a new handset
All handsets included in the package are
already registered to the base unit.
Only for separate handsets/service
measures.
You can register up to 6 handsets to one
base unit.
This model is GAP (Generic Access Profile) compatible,
which means that the handset and the base unit can both be
used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed. Extra handsets will not
be available as accessories.
1. Hold down the
indicator flashes.
2. Press Menu. Scroll to Registering. Press Select.
3. Scroll to required base unit (Blue=previous reg.). Press Ok.
4. Enter the base unit PIN code (e.g. 0000). Press Ok.
5. If the registration is successful the unit will return to
standby mode within one minute.
To deregister a handset
The base unit ringer can be adjusted.
Only applies to NeoBio 45r.
Must be in tone in most countries.
Long = New Zealand.
Medium = France/Portugal
Short= Other countries UK/Australia
The code (e.g. 0000) can be changed.
First ringer signal on/off. For SMS etc.
Resetting base unit.
button on the base unit until the
J
Publicité
