Publicité
Les langues disponibles
Les langues disponibles
Temporary Do Not Disturb
When someone calls, you can press Silent to turn off the
handset ringer temporarily.
Paging
The handset will ring when
pressed. The signal will stop automatically after a while or
if the
button on the handset or the
L
base unit are pressed.
Phonebook
You can save 100 names and numbers.
If you subscribe to a caller ID service,
the name allocated to the caller in the
phonebook will be shown for incoming
calls. It is possible to choose between various ringers for the
numbers saved in the Phonebook (provided you subscribe to
a caller ID service).
While storing a name you can change between European,
Russian and Greek by pressing
seconds. Repeat to change again.
Save name/number in handset
1. Press
Press Menu.
2. Scroll to PB. Press Select.
3. Scroll to Add. Press Select.
4. Press equivalent digit key several times for desired
name. Press
.
}
5. Enter the telephone number including the area code
(Clear=Erase). Press
6. Scroll to desired ring setup
Managing the phonebook
1. Press PB (right menu button). Scroll through the
entries using
/
{
}
phonebook by pressing the corresponding number key
for the first letter.
2. Press
to call.
Managing the phonebook
1. Press Menu.
2. Scroll to PB. Press Select.
3. Scroll to desired function e.g. PB status to see how
many entries have been used. Press Select.
4. Scroll through the entries with
search the phonebook by pressing the corresponding
number key for the first letter.
(on the base unit) is
J
button on the
J
and holding for 2
*
.
}
/
. Press Ok.
8
9
. You can quick search the
/
. You can quick
{
}
English
Incoming numbers/Caller ID
The display shows you who is calling and the
30 most recent missed calls. New Call(s)
will be shown in standby mode and in
the list indicates a missed call. This function
requires a subscription from your service provider!
Retrieving and dialling
1. Press
. Scroll to desired position with
9
2. Press
to call or press Select followed by Menu for
various options.
In order to remove the text
the log be read individually by pressing
entry (marked with
Delete all calls
1. Press
.
9
2. Press Select followed by Menu.
3. Scroll to Delete All. Press Select.
4. Press Ok.
Caller identification messages
In addition to number display, the following messages will
be shown occasionally:
E.g. international call.
Out Of Area
Unlisted number. Number cannot be
Withheld
shown.
MSG indication for network operator's
a
answer service
*Delete: Press
and then hold down
9
Clock/Alarm
1. Press Menu. Scroll to Clock/Alarm.
Press Select.
2. Scroll to desired setting. Press Select.
Date & Time
Alarm
, must each entry in
New Call(s)
Select
) in the list or delete all calls.
.
Press Ok.
4
Setting the date & time.
An activated alarm clock is indicated by
in standby mode. When the alarm
goes off, an audio signal will be heard
for 40 seconds. Deactivate permanently
with Off or press any button/Snooze
for repetition after 5 mins (activate this
setting when programming). The volume
is determined by the set ringer level.
.
}
at every new
Publicité
