Gardena Flex Mode D'emploi page 16

watering is not to be carried out (see GARDENA
Soil Moisture Sensor Operating Instructions).
There are 3 levels to choose from.
– During normal operation, the currently measured
level is displayed constantly.
– The switching point as of which the sensor sig-
nals that the soil is moist – thereby preventing
watering – is selected via the number of levels.
– 0 dots for loamy soil
v Sensor response when soil is quite dry.
– 3 dots for sandy soil
v Sensor response when soil is very moist.
Soil Moisture Sensor, Art. 1188,
(optionally available,
models up to 2020)
The soil moisture level at which a watering
will not be carried out as per the schedule
can be set using the switching point controller
on the soil moisture sensor (see GARDENA Soil
Moisture Sensor Operator's manual).
5. MAINTENANCE
16
1890-20.960.05.indb 16
v (Fig. E)
6. STORAGE
To put into storage:
v The product must be stored away from
children.
v To preserve the battery, it should be removed
(fig. B).
v Store the controller and the valve unit in a dry,
enclosed and frost-free place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to
normal household waste. It must be dis-
posed of in line with local environmental
regulations.
IMPORTANT!
Dispose of the product through or via your
municipal recycling collection centre.
Disposal of the battery:
v Please return a flat battery to a GARDENA dealer
or dispose of it properly at your nearest recycling
centre.
Dispose of the battery only when discharged.
17.12.20 15:46