Resetting The Appliance - Blanco BC PC 4200 Manuel D'utilisation Et D'installation

EMPTYING THE WELL
Emptying
To carry out this operation, proceed as follows.
1 - Place a container of suitable size underneath
the drain tap (B).
2 - Use the knob (A) to turn on the tap and empty
the well.
3 - Return the knob to its original position once the
well has been drained

RESETTING THE APPLIANCE

Important
Tripping of the thermostat with automatic
reset is indicated by the flashing "ALL"
alarm on the display (B).
If the safety thermostat is tripped, the appliance
has to be restored to the initial working conditions
as follows.
1 - Leave the appliance to cool.
2 - Press button (A) to set the circuit board in
standby mode.
3 - Press button (A) to switch on the appliance and
start the cooking cycle.
Important
If the safety thermostat is tripped too often,
call the after-sales service.
- 9 -
A
B
English
IT
GB
DE
FR
ES