Adjustments; Replacing Parts - Blanco BC PC 4200 Manuel D'utilisation Et D'installation

TESTING OF THE APPLIANCE
Important
Before it is put into service, the system
must be tested to check the operating con-
ditions of every single component and
identify any malfunctions. In this stage, it is
important to check that all health and safety
requirements have been complied with in
full.
To test the system, make the following checks.
1 - Check that the mains voltage is the same as
ADJUSTMENTS PROCEDURE
The appliance's main functions do not require any
special adjustments by specialist staff except the
settings made during use by the user.
REPLACE PROCEDURE
The appliance does not require the replacement of
operating components by specialist staff except the
replacement of standard parts which can be carried
out by the user.
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work.
Never dump non-biodegradable materials, lu-

ADJUSTMENTS

REPLACING PARTS

- 17 -
that of the appliance.
2 - Operate the appliance's circuit-breaker to
check the electrical connection.
3 - Check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
bricating oils and non-metallic components
(rubber, PVC, resins, etc.) in the environ-
ment. Dispose of them in accordance with
the relevant legal requirements.
8
9
IT
GB
DE
FR
ES
English