Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RECOMMENDATIONS FOR USE
Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
DESCRIPTION OF CONTROLS
The panel carries the controls for the following func-
tions.
A)Cooking start and stop (ON/OFF) button: for
starting or stopping the cooking program.
– With circuit board OFF: press once to switch on
the circuit board.
– With circuit board in standby mode or with heat-
ing in progress: hold down for +/- 6 seconds to
switch off the circuit board.
B)Temperature setting button: decreases the
temperature (during programming and use).
C)Temperature setting button: increases the
temperature (during programming and use).
D)Power button: per selects one of the three
power settings.
– With circuit board on or with heating in progress:
press once to select one of the three power levels
available.
E)Display: consists of 7 icons and 4 Digits:
e1) CELSIUS icon: on when the temperature is
displayed in degrees Celsius.
e2) FAHRENHEIT icon: on when the temperature
is displayed in degrees Fahrenheit.
e3)
THERMOMETER icon: on if heating is in
progress.
e4) HEATING ELEMENT icon: three icons control-
led separately depending on the power selected us-
ing button (D).
e5) ON/OFF icon: illuminates to indicate that the
appliance is powered up.
USE AND OPERATION
and the main functions. Use only as intend-
ed by the constructor and never tamper
with any device to obtain performance lev-
els outside the rated specifications. Before
use, check that the safety devices are prop-
erly installed and in good working order. As
well as taking care to meet these require-
ments, users must also implement all safe-
ty regulations and read the description of
the controls and the start-up procedure
carefully.
e6) Group of DIGITS:
– With circuit board OFF: OFF.
– With circuit board in standby: shows 4 red
dashes
– With circuit board in setting mode: shows the
temperature setpoint in green.
– With
heating
temperature in red.
- 7 -
in
progress:
displays
4
IT
GB
DE
FR
ES
the
English
Publicité
Chapitres
Table des Matières
