Addition Of Surface Areas - Parkside PMML 5 A2 Instructions D'utilisation Et Consignes De Sécurité

the surface area calculation will ap-
pear in the lower row
play
2
Note: You can switch between m²
and sq.ft. To switch between m² and
sq.ft, press and hold the MODE button
for 3 seconds. The measurement
10
unit
22
Addition of surface
areas
1. Measure an area as described in the
section "Measuring surface areas".
2. Press the Memory button
symbol "M+"
in the display
surface area is now saved.
3. Press the MODE button
product is now ready for the second
measurement.
4. Measure the next surface area as
described in the section "Measuring
surface areas".
5. Press the Memory button
The result of the first measurement
30 GB/IE/NI
.
will be changed.
will be appeared
24
. The measured
2
of the dis-
21
. Saving
4
. The
10
again.
4