Maintenance And Cleaning - Parkside PMML 5 A2 Instructions D'utilisation Et Consignes De Sécurité

Maintenance and
cleaning
The product is maintenance-free.
CAUTION! Never submerse the product
in water or other liquids. Do not allow any
moisture to penetrate into the product
during cleaning.
Clean the laser beam output opening
and the receiver lens
15
soft dry cloth gently. In the case of
more serious contamination, remove
the dirt with a dry cotton swab gently.
Do not exert any strong pressure!
Never use liquids or detergents, petrol,
solvents or other cleaning agents that
attack plastic.
Clean the outside case of the product
only with soft dry cloth (or) very
slight damp cloth.
Keep the product clean to ensure
fault-free operation.
42 GB/IE/NI
with a
16