Measuring Surface Areas - Parkside PMML 5 A2 Instructions D'utilisation Et Consignes De Sécurité

measurements and results will be
cleared from the display
Measuring surface
areas
1. Slide the function switch
position "MEAS / DETECT" mode.
The display
display
press the POWER button
on the display
2. Press the MODE button
measuring mode indication symbol
for area will appear on the display
and the letter "L" (length) will flash
on the display
3. Press the MEAS button
measure the length. The measured
length will appear in the upper row
of the display
20
"W" (width) will start to blink on the
display
4. Press the MEAS button
measure the width. The measured
width will appear in the upper row
of the display
20
will be turned on. If
2
is not turned on, briefly
2
.
2
.
2
2
.
2
2
.
2
to the
9
to turn
12
once. The
10
twice to
6
and the letter
twice to
6
. The results of
GB/IE/NI
27
2
29