Publicité
How to obtain a replacement key
12
Troubleshooting
The Problem:
Why It Is Happening:
Display reads "E-code"
Incorrect personal code entry
Display reads "AGAIN"
Card was swiped incorrectly
followed by "CARD"
from left to right -Or- Card was
swiped too fast or too slow
Display reads "E-Card"
Not swiping the same card
originally used to open safe
Display reads "LO-BAT"
Low battery
when door open or closed
Display reads "b-LOC"
Door is not locked. Bolts are not
able to extend.
Display reads "HOLD" +
(3) repeated incorrect user
"DIGIT"
attempts
Safe will not open when
Batteries in battery pack
using auxiliary remote
are insufficient
battery pack
The Solution:
Verify personal code
and reenter
Evenly re-swipe card from
right to left
Swipe original card used
to open safe
Replace old batteries with
(4) new AA size alkalkine
batteries
Unlock the unit then
hold the door closed and
attempt to re-lock it
Wait 15 minutes and then
input correct user code or
correct stripped card
Replace old batteries with
(4) new AA size Alkaline
batteries
13
Publicité
