skilsaw SPT70WT Consignes D'utilisation/De Sécurité page 11

2610039875 12-15 E_SPT70WT 12/23/15 10:54 PM Page 11
13. TABLE INSERT
Removable for removing or installing blade or
other cutting tools.
14. TABLE
Provides large working surface to support work-
piece.
15. MITER GAUGE
Head can be locked in desired position for cross-
cutting or mitering by tightening the lock knob. AL-
WAYS SECURELY LOCK IT WHEN IN USE.
16. CORD WRAP
Allows you to easily secure the cord so it's out of
the way when transporting or storing.
17. ANTI-KICKBACK DEVICE STORAGE
Storage location for anti-kickback device when not
in use, or when transporting or storing the table
saw.
18. RIP FENCE STORAGE
Storage location for rip fence when transporting or
storing the table saw.
19. ONE-HANDED CARRY HANDLE
Optimized position to carry tool at side with one
hand.
18
19
Getting To Know Your Table Saw
FIG. 2
17
20
-11-
20. MITER GAUGE STORAGE
Storage location for miter gauge when not in use,
or when transporting or storing the table saw.
21. HEX WRENCH & STORAGE
Hex wrench for adjusting the riving knife / splitter
and various hex heads on the saw.
22. WRENCH & STORAGE
Wrench for the removal and installation of saw
blades.
23. DUST PORT/VACUUM HOOK-UP
Removable to clear large pieces of wood trapped
inside. Always check to ensure dust port is se-
curely fastened to table saw before use. Attach 2-
1/4" vacuum hose into dust port for convenient
sawdust removal.
24. SMART GUARD SYSTEM STORAGE
Storage location for Smart Guard System when
not in use, or when transporting or storing the table
saw.
21 22 23 24