Getting To Know Your Table Saw - skilsaw SPT70WT Consignes D'utilisation/De Sécurité

2610039875 12-15 E_SPT70WT 12/23/15 10:54 PM Page 10
1. POWER SWITCH
Switch incorporates hole for use with padlock to
prevent accidental starting.
2. ELEVATION WHEEL
Elevates or lowers the blade. Also used to tilt the
blade 0 to 45 degrees.
3. BLADE BEVEL LOCK HANDLE
Locks the blade to de sired bevel angle.
4. BLADE BEVEL SCALE
Shows the degree the blade is tilted.
5. BASE
Supports table saw. Holes are provided in base to
bolt the saw to a workbench or stand. Includes in-
tegrated carry handle.
6. STAND ATTACHMENT BRACKET
Quick connect attachment point for folding leg
table saw stand.
7. PUSH STICK & STORAGE
Allows you to rip smaller pieces of stock with a
greater level of safety.
FIG. 1
15
16

Getting To Know Your Table Saw

12
13
14
1 2
-10-
8. TABLE EXTENSION LOCK HANDLE
Allows you to lock the table extension at desired
distances. Also prevents use of table saw with un-
locked extension.
9. TABLE EXTENSION
Provides a larger work surface for wider work-
pieces.
10. RIP FENCE
Exclusive Self-Aligning, Squarelock rip fence can
be easily moved or locked in place by raising or
lowering lock handle.
11. RIP FENCE SCALE
Shows the distance from the blade to rip fence
through a convenient viewing and magnifying win-
dow. Lower portion of scale can be used up to 11
inches. Upper portion of scale is used for cuts be-
yond 11 inches.
12. SMART GUARD SYSTEM
Consists of three key elements: Riving Knife (Split-
ter), Anti-Kickback Device, and Barrier Guard De-
vice. All of these are part of a modular system that
requires no tools to assemble or unassemble. This
Guard System must always be in place and work-
ing properly for all through sawing cuts.
11
10
3 4 5 6
9
8
7