Daily Cleanning / End Of Work - MVP Jet-Tech 757E Instructions Pour L'installation, Emploi Et Entretien

2- Load glasses and bowls in upside down
position. (Fig.18)
Fig.18
3- Load cutlery vertically
containers. (Fig.19)
Fig.19
4- Load rack machine
described on the figure. For undercounter
models load the rack front side. For
hoodtype models load the rack front side or
sideways (if necessary switch rack support
clockwise). (Fig.20)
Fig.20
3C – DAILY CLEANNING / END OF
WORK
In order to have excellent washing results and
a cleaned tank, it is recommended to change
the water of the machine at least twice a day
and clean accurately all the filters inside the
tank. Filters must be removed only once all the
water is drained out of the machine.
3C1 – WATER DRAIN (
MACHINE WITH DRAIN PUMP
1- Open the door and remove the water flow
device. (Fig.21)
Fig.21
inside its
with dishes as
ELECTRONIC
)
2- Turn OFF the machine by pressing
button "A" On/Off. (Fig.22)
Fig.22
3- Wait until all the water is completely
drained out from the tank. The machine
will turn OFF automatically
completing drain process.
3C2 – FILTERS CLEANNING
1- Turn OFF the machine by pressing
button "A" On/Off.
2- Manually remove side or central filters
inside the tank.
3- Wash and clean filters accurately on
running fresh water.
4- Repositionated all
components inside the machine.
3C3 – EXTERNAL SURFACES
CLEANNING
Before carrying out
operations, turn off the power at the mains.
To reduce the emmission of pollutants into
the enviroment, clean
(externally and where necessary internally)
with products having a biodegradability of
over 90%.
WARNING!
CLEAN STAINLESS STEEL SURFACES
BY USING WARM SOAPY WATER;
NEVER USE DETERGENT CONTAINING
ABRASIVE SUBSTANCES NOR STEEL
SCRAPERS, COMMON WIRE WOOL,
BRUSHES OR SCRAPES;
THOROUGHLY USING A WET CLOTH
AND CAREFULLY WIPE DRY.
DO NOT WASH THE APPLIANCE BY
USING DIRECT OR HIGH PRESSURE
WATER JETS.
3C4 – TURNING OFF THE MACHINE
1- Drain out completely the water from the
tank. (see par.3D)
2- The machine will
automatically after completing drain
process.
3- Close the door and turn off the power at
the mains.
after
filters and
any cleanning
the appliance
RINSE
turn OFF
14