MVP Jet-Tech 757E Instructions Pour L'installation, Emploi Et Entretien page 14

1- Open the door.
2- Add recommended quantity of detergent
inside the tank – only models without
automatic dispenser included – (see par.
3B2)
3- Insert dirty loaded dishes basket and close
the door.
4- Press the button "C" and choose the
desired program. (Fig.13)
Fig.13
5- Press button "B" start washing cycle.
(Fig.14)
Fig.14
6- Wait end of the cycle until countdown is
finisced. Button B is yellow when the
machine is heating and green when is
ready to start another cicle. (Fig.15)
Fig.15
- During washing cycle BLUE light indicator
is blinking on button "B" and time remaining is
displayed.
- If during this process door is opened,
washing cycle is interrupted and "Door open" is
displayed. When the door is closed, the
machine finish the cicle.
N.B.: The machine is equipped with different
washing cycles, from 1 to 4. Use PROGRAM 1 , 2
short cycle for light dirty dishes. Use PROGRAM 3
medium cycle for medium dirty dishes. Use
PROGRAM 4 long cycle for very dirty dishes.
3B4 – USER MENU
There are options available to activate:
-Thermostop
-Autostart
-Soft start
-Detergent loading
-Rinse aid loading
-Buzzer
-Degree unit conversion
-Language
-Technician
Press C button for 3 sec.
With E and F buttons choose the option and
select with B button.
With E and F buttons choose the desired
setting and confirm with B button.
Press A button or wait few seconds to return at
home menu.
3B5 – THERMO STOP VERSION
Machines with THERMO STOP function may
have cycle time longer than standard machine
in case minimum booster temperature water is
not enough hot for the final rinse. This device
ensures correct final sanitization on the dishes.
- During thermo stop washing phase button
B blinks with blue light until final rinse
temperature is reached and the cycle is
finished. It's possible to finish the cicle by
pressing button B (Fig.16)
Fig.16
3B6 – STANDARD LOADING RACKS
1- Load plates in frontal position. (Fig.17)
Fig.17
13