Daily Cleaning / End Of Work - MVP EV18 Instructions Pour L'installation, Emploi Et Entretien

Fig.18
5- Wait until indicator light "F" is OFF and
an "end" message appears on the display
(Fig.19). Open the door and remove
clean dishes basket.
Fig.19
- If during this process door is opened, the
washing cycle is interrupted until door is
closed. To continue and finish washing
cycle you must close the door.
WARNING!
THE APPLIANCE WILL
BURNT FOOD DEPOSITS
DISHES. DISHES WITH BURNT ON FOOD
DEPOSITS SHOULD BE MECHANICALLY/
CHEMICALLY CLEANED.
FOR
EXAMPLE, PRE-WASH
RUNNING WATER BEFORE
THEM IN THE DISHWASHER.
DO NOT USE "FOAMING" DETERGENTS
OR USE DETERGENTS
OTHER
THAN PRESCRIBED BY THE
MANUFACTURER.
3C3– AUTOMATIC CYCLE (hood type
machines only)
It is possible to carry out an automatic
washing cycle by simply closing the door of
the machine.
1- Press the "E" key to select the wash
cycle. (Fig. 20)
E
Fig.20
2- Close the door. The washing cycle will
start automatically.
The first cycle must be started by
-
pressing the button of the washing
cycle. All other cycles will be automatic.
3D – DAILY CLEANING / END OF
WORK DAY
Cleaning and user maintenance must not be
performed by children without supervision.
In order to have excellent washing results and
a clean tank, it is recommended to change
the water in the machine at least twice a day
and clean all the filters inside the tank.
Filters must be removed only once all the
water has been drained from the machine.
1- Turn OFF the machine by pressing button
NOT REMOVE
FROM
2- Open the door and remove the water flow
UNDER
PUTTING
Fig.21
IN A
WAY
1- Open the door and remove the water flow
Fig.22
2- Press button "B" to start drain out the
Fig.23
3- The water drain message will appear on the
Fig.24
4- Turn OFF the machine by pressing button
3D1 – WATER DRAIN WITHOUT DRAIN
PUMP INCLUDED
"A" On/Off.
device and close the door. (Fig.21)
3D2 – WATER DRAIN WITH DRAIN PUMP
INCLUDED
device and close the door. (Fig.22)
water and wait until all the water is
completely drained out from the tank.
(Fig.23)
B
display during the process. (Fig.24)
"A" On/Off.
13