AutomaticUpdate; ManualUpdate - Monitor Audio CUSTOM Serie Guide D'utilisation Du Propriétaire

AutomaticUpdate.

1. To carry out the update, click on OK. You will then see
another pop up showing the product, version number and
a brief summary of the changes.
2. Click on Update and you will then see a progress bar
showing the status of the update.
3. When it is complete you will get confirmation and the
subwoofer will reboot (when you click on OK). If there is
a signal going into the subwoofer, it will automatically
start up. If there is no signal, the subwoofer will need to
be woken up by applying a signal or by pressing the
Preset button.

ManualUpdate

If the automatic update doesn't work, or you wish to manually
check for an update, open the app and with the Subwoofer on
and connected, click on Tools > Firmware Update.
1. Click check for update. If the Subwoofer is up to date, you
will be informed, likewise, if there is an update available
for it you will also be informed.
monitoraudio.com 7