Upkeep And Maintenance; Recalibration - LEM ISO plus Manuel D'utilisation

Upkeep and Maintanance

9 Upkeep and Maintenance

If the instrument is operated and handled properly it does not need specific
maintenance and service. Maintenance work must only be undertaken by trained
and qualified staff and during the warranty period only by authorized service
centres.

Recalibration

As an additional service we offer a regular inspection and calibration of your
instrument. Upon request and for a fee we can supply full test calibration certificates
Storage
In case the instrument is either not used or stored for a longer period, remove
batteries and keep them separately beforehand to avoid possible damage by
leaking battery electrolyte.
Service
This instrument has been manufactured and tested according to the latest
technological innovations and in compliance with the quality assurance system
DIN ISO 9001.
If there should still be reason for complaint please refer to your nearest service
centre, giving a detailed description of the defect by using the enclosed service
card and including a copy of the invoice or the delivery note. If the instrument is
operated as agreed we guarantee fault free function of the instrument for a period of
2 years years after the date of the first end-user purchase. This warranty does not
apply to any damage caused by improper treatment or operation or by
impermissible overload.
Packing
For shipping use the original packing only. The manufacturer doesn't accept any
claims for damage that might have occurred through inappropriate packing.
- 31 -