Adjustable Upper Rack; Removing The Upper Rack - Electrolux EDW5505ESS Guide D'utilisation Et D'entretien

14
Loading

ADJUSTABLE UPPER RACK

The Adjustable Upper Rack can be raised or lowered to accommodate taller
plates, platters, pans, etc. optimizing usable space in both upper and lower racks.
Full-size dinner plates can be loaded in the upper rack if it is in the lower position.
Always adjust the upper rack before loading.
Adjusters
To lower the rack:
1. Pull the rack fully out.
2. Place thumbs on each lever on the adjuster while holding rack with hands.
3. Press down on the levers with thumbs and push rack down. The rack will
To raise the rack:
1. Pull the rack fully out.
2. Place hands on both sides and lift up until rack comes to a stop and latches
IMPORTANT
• The dishwasher will not operate correctly if the wash arm is not aligned with one of the
water inlet holes on back wall of the dishwasher.
• The left and right side adjusters on the racks must both be fully in the upward or
downward position for proper connection.

REMOVING THE UPPER RACK

The rack can be removed when tall or oversized items need to be loaded into the
lower rack. Unload the rack before removing it from the dishwasher.
To remove rack with tab-lock rack stops:
Tab Lock
1.
2.
3.
To replace:
1. Replace the dishwasher rack by guiding the wheels into the tracks.
2. Push each rack stop squarely into the end of the track until the catch pops
into the small hole on the side of the track.
come to a stop when it is in position.
in place.
Roll the rack 1 ⁄ 3 to 1 ⁄ 2 of the way out.
Locate the rack stops at the end of each track. Squeeze the tab in the
middle of the rack stop and pull the rack stop straight out. Take care to
support the rack while removing the rack stops.
Roll the rack all the way out of the track and remove from the
dishwasher.