Niko 10-806-01 Mode D'emploi page 30

10-806-01
4.2. Setting the activation time of the door opener and the lighting relay
Set the activation time using the potentiometers on the right-front of the video power supply:
Potentiometer
t max.
t 8 s
max.
8 s
t
max.
t 5 min
max.
5 min
RUN
RUN
PROG
1. Using a small screw driver, rotate the potentiometer to the desired position. PROG
RUN
PROG
RUN
The LED on the power supply is illuminated.
PROG
2. Press the PROG. button briefly.
The LED on the power supply flashes.
3. Press the PROG. button again briefly.
The LED on the power supply is illuminated and the new activation time has been set.
4.3. Activating and deactivating the light switching function of the door opener
button
Do you want to ...
activate the light
switching function?
deactivate the light
switching function?
Standard setting.
*
EN
potentiometer for the door opener
preset at 4 sec
potentiometer for the lighting circuit
preset at 2,5 min
Action
1. Press and hold (± 3 sec) the
PROG. button while the LED on the
power supply is illuminated.
The LED on the power supply
flashes.
Press the PROG. button briefly
The LED on the power supply is
illuminated.
1. Briefly press the PROG. button while
the LED on the power supply is
illuminated.
The LED on the power supply
flashes.
2. Press and hold (± 3 sec) the
PROG. button.
The LED on the power supply is
illuminated.
Range
0,8 – 8 sec
0,8 sec – 5 min
Result
The lighting relay
from the power
supply is activated
if there is no
conversation and if
you press the door
opener button.
The lighting relay
from the power
supply is activated
if you press the
door opener but-
ton, regardless
of whether there
is a conversation
or not.
*
30