Rubi RUBIMIX-9 SUPERTORQUE Traduction De La Notice Originale page 9

extension cords suitable for outdoor use. Using
extension cords that are suitable for outdoor use
reduces the risk of electric shock.
f. If using the tool in a damp area is unavoidable,
use a power supply that is protected by a residual
current device (RCD). The use of an RCD reduces
the risk of electric shock.
3) Personal Safety
a. Be alert and pay attention to what you are
doing, and use common sense when handling
an electric tool. Do not use electric tools when
you are tired or under the influence of alcohol,
drugs or medication. A moment of distraction
while handling electric tools can result in serious
personal injury.
b. Use personal safety equipment. Always wear eye
protection. Using safety equipment that is suited
to the conditions, such as a dust mask, non-slip
footwear, helmet or hearing protection will reduce
personal harm.
c. Avoid accidental startup. Make sure that the
switch is in the "open" position before plugging
the machine in and/or connecting the battery,
picking up or carrying the tool. Carrying electric
tools with your finger on the switch or plugging
in electric tools that have the switch in the "on"
position leads to accidents.
d. Remove any spanners or adjustment tools before
starting the electric tool. A spanner or tool
connected to a rotating part of an electric tool can
result in personal injury.
e. Do not overextend. Keep your feet firmly on the
floor and keep your balance at all times. This
gives you better control over the electric tool in
unexpected situations.
f. Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothing,
jewellery and long hair can become snagged in
moving parts.
g. If there are devices for connecting suction and
dust collection equipment, make sure they are
connected and used correctly. Using these devices
can reduce the risks related to dust.
4) Use and care of electric tools.
a. Do not force electric tools. Use electric tools
correctly for their proper application. The proper
electric tool will work better and safer at the speed
for which it was designed.
b. Do not use electric tools if the switch does not
turn to "on" and "off". Electric tools that cannot
be controlled with switches are dangerous and
should be repaired.
c. Unplug the electric tool from the power supply
and/or battery before making any adjustments,
changing accessories or storing the tools. These
preventive safety measures reduce the risk of
accidentally starting the tool.
d. Store electric tools out of reach of children
when not in use and do not allow people who
are not familiarised with the tools or with these
instructions to handle the electric tool. Electric
tools are dangerous in the hands of untrained
users.
TRANSLATION OF THE ORIGINAL
e. Keep cutting tools sharp and clean. Cutting tools
that are properly maintained, with sharp cutting
edges, are less likely to become jammed and can
be controlled more easily.
f. Use electric tools, accessories, tool bits, etc.
according to these instructions and taking into
account the working conditions and the work
that is to be done. The use of electric tools for
applications other than those for which they are
designed can result in dangerous situations.
5) Technical service
a. Have your electric tool checked by a qualified
repair service using only identical spare parts.
This guarantees that the safety of the electric tool
will be maintained.
Additional safety warnings from the manufacturer
1) WARNING! Do not use the machine for uses other
than those for which it was designed.
2) Adequate artificial lighting is required in work areas
when ambient light is insufficient.
3) Recommended operating temperature between 0 and
40°C and between 0.8 and 1.1 bar (maximum humidity
95%).
4) Before starting operations, wear protective gloves,
hearing protectors and protective glasses.
5) When unpacking the machine, and also after each use,
check for dents or deformations and broken parts and
cords. If any of these are found, do not use the electric
tool and contact the manufacturer immediately.
6) Do not use the mixer to work with flammable liquids
or gases, nor any material other than mortar or
cementitious adhesives. Furthermore, do not use
the tool if there are flammable liquids or gases in the
vicinity.
7) Hold the mixer firmly during use.
8) Keep the tool clean and free of grease, oil and dry
mortar or cement residue. Do not use aggressive
chemical products or solvents during cleaning. See
the "Cleaning and maintenance" section for more
information.
2.3 Work area
Work position
ENGLISH
9