Braun JB 7192 Mode D'emploi page 14

Troubleshooting Guide
Problem
Blender does not operate.
Jug is leaking
Liquid splashing out of the jug
14
Potential Causes
Jug is not attached properly.
Gasket is loose, or even torn.
Jug is overfi lled.
Speed selected is too high.
Solution
Check the position of the jug.
The jug handle should be on the
right or left side of the motor
body.
Check if gasket is mounted
properly and in the right order.
Check maximum quantity
recommendation.
Check speed recommendation.