Creating Own Programs - Davita DIGITAL FIT TENS/EMS 1200 Mode D'emploi

If an incontinence treatment has to be done a connection cable is inserted into the
connector on the top of the device on channel A or B. This cable has to be connect-
ed with a probe.
3. The ON/OFF button has to be pressed, to turn on the device.
4. With the two group buttons channel A and B can be operated independently and
simply.
5. The ↑ or ↓ arrow of the group button must be pressed repeatedly until the numbers
on the left side of the call/mem function (Program memory) start to flash. With the +
or – button the desired program for the application can be selected.
The detailed list of the available programs of the device can be find in chapter
5 „Specifications and preset programs".
The DIGITAL FIT
programs for muscle stimulation, 4 massage programs and 4 incontinence pro-
grams. In addition 4 programs can be programed and stored by the user.
6. To adjust the treatment duration easily the time-button must be pressed so long
until the desired treatment duration for example 20 minutes appears below the timer
symbol on the top of the display.
7. To adjust the intensity the ↑ or ↓ arrow of the group buttons control must be
pressed repeatedly until the numbers on the left side of the mA start to flash. The in-
tensity can increased with the + button of the group buttons control and decreased
with the – button.
The adjustment of the intensity depends on various individual factors such as skin
resistance, skin density e.g.. In all cases, where the stimulation is unpleasant the in-
tensity should be reduced or the treatment has to be finished.
If the intensity was increased to quickly and therefore the application is perceived as
too strong the – button can be pressed to stop the increasing of the intensity imme-
diately.
8. The program can be finished at any time by pressing the ON/OFF-button and the
unit is switched off.
3.3 Further adjustments of the electro stimulation device
®
DIGITAL FIT
In addition to the above described settings there is the possibility to create own pro-
grams and to read and to reset the therapy memory.

3.3.1 Creating own programs

1. The channels A and B of the unit are locked (Lock).
To unlock the channels (Unlock), the ↑ or ↓ arrow of the group buttons control must
be pressed so often until the digits on the left side of the call/mem function (program
memory) start to flash. Then the + button of the group buttons control must be
®
TENS / EMS 1200 has 12 TENS-programs for pain therapy, 8
TENS/EMS 1200
20 / 59