Publicité
Les langues disponibles
Les langues disponibles
Auto Programmes
1.
With the unit in standby mode, press the auto button.
2.
Next, press the desired program button (
3.
The blender will operate automatically to suit the selected program. It may stop and start during the
program. This is normal.
You can stop the program at any time by pressing the Y / 2 button.
4.
CONTROL PANEL
Button
Manual function
1
Speed setting 1
2
Speed setting 2
3
Speed setting 3
4
Speed setting 4
5
Speed setting 5
Pulse for fine control or used to stop the motor
Y / 2
auto
Use to select programmes. Press first followed by 1 to 5.
3
On/off
GENERAL TIPS
•
When blending dry ingredients do not fill past the 500 mark on the jug.
•
To prevent overheating, place dry goods (rice, corn) in the freezer 15 minutes before blending.
•
To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole then replace the cap.
•
When processing hard ingredients, keep one hand on the lid to steady the jug during processing.
•
Cut food into 20mm pieces.
•
If food becomes stuck to the sides of the jug during processing, switch the appliance off and use a
rubber spatula redistribute the food. Replace the lid then continue processing.
•
When making bread crumbs, make sure the jug is completely dry.
•
When using the pulse control, use short bursts allowing the blades to stop between pulses. Don't
press pulse for more that 30 seconds.
•
Before blending hot ingredients, allow them to cool for 5 minutes. Remove the cap to allow steam
to escape and start on a low speed (1-3). Cover the hole in the lid with a tea towel or similar (FIG B).
•
To crush ice, add 12-15 cubes (max) and pulse to the desired consitency. Make sure the jug is clean
and dry before crushing ice.
TROUBLESHOOTING
Problem
All lights flashing
Blender stops and goes into
standby
1
2
,
,
Auto Program (press the auto button first)
Soup - use for making soups
Green Smoothie - use with fibrous vegetables like celery, kale,
spinach, etc.
Purée - use for puréeing ingredients
Dry goods - use for grinding/chopping dry ingredients.
Smoothie - blend frozen fruits and other ingredients into
thick smoothies
Cause
Blender has overheated
Button has been held for more
than 30 seconds
Blending time exceeds 2½
minutes
4
3
4
5
,
or
).
Solution
Unplug and allow to cool for 20
minutes
Unplug the unit to reset it
Reselect an appropriate speed
to start the blender
Publicité
