Alpine CVA-1003 Mode D'emploi page 55

1 RCA Extension Cable (Sold Separetely)
2 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with DVD video player)
5 Ai-NET Cable (Included with CD Changer)
6 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
7 RCA Extension Cable (Included with DVD video
player)
8 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
9 Power Supply Connector
! RGB Input Connector
Connect to the RGB output terminal of the KCE-
103V.
" System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
All manuals and user guides at all-guides.com
Installation and Connections
# AUX Audio Input (AUX1) Connectors
$ AUX Video Input (AUX1) Connector
% Ground Lead (Black)
& RCA Extension Cable (Included with KCE-103V)
( Connect to the AUX Input (AUX1) Connecters of
) To AUX Output Terminals of the KCE-103V
~ Connect to the RGB Terminal of the Navigation
+ Connect to the RGB Input Terminal of the CVA-
, To AUX Input1 Terminals of the KCE-103V
- To AUX Input2 Terminals of the KCE-103V
. To Video Output Terminals
/ RGB Cable (Included with NVE-N852, not
: RGB Cable (Included with KCE-103V)
; RCA Extension Cable (Included with KCE-150V)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
the CVA-1003
System
1003
included with NVE-N871A)
53
-EN