Setting The Treble Control; Setting The Treble Control - Alpine CVA-1003 Mode D'emploi

Setting the Treble Control

You can change the Treble Frequency emphasis
to create your own tonal preference.
1
When the monitor display is open, press the
bass engine button. Bass engine mode is
displayed in the monitor display.
2
Press the Preset 2 button to select the desired
mode.
3
Press the g DN or f UP button to adjust
the selected mode.
• Treble Level : -7~+7
You can emphasize the treble frequency.
• Treble center frequency:
10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
4
Press the bass engine button to return to the
normal mode.
NOTES
• If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
• Depending on the type of external audio processors
connected to the unit, you may not be able to set some
settings.
• The settings of the Treble will be individually
memorized for each source (FM, AM and CD) until
the setting is changed. Depending on the connected
devices, some functions and display indications do not
work
All manuals and user guides at all-guides.com
Other Useful Features
Operation with the monitor display closed
You can set the Treble control with the monitor
display closed.
1
Press the bass engine button.
2
Press the Preset 2 button. TREBLE is
displayed for 2 seconds in the sub display,
then the value of TREBLE Level blinks.
3
Each time you press the Preset 2 button, the
blinking shifts.
Example of sub display
4
Press the g DN or f UP button to
adjust the selected mode.
29
-EN