Alpine CVA-1003 Mode D'emploi page 53

When connecting with NVA-N751AS of the Alpine's Navigation System.
(NVA-N751AS)
Navigation Unit
(Sold Separately)
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
2 RCA Extension Cable (Sold Separetely)
3 RGB Cable (Included with NVE-N852, not
included with NVE-N871A)
4 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
5 Ai-NET Cable (Included with DVD video player)
6 System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
7 AUX Video Input (AUX1) Connector
Connect the video output lead of a DVD video player
or DVD changer to this terminal.
All manuals and user guides at all-guides.com
Installation and Connections
DISPLAY CONTROL IN
(Yellow/Red)
GUIDE CONTROL OUT
(White/Green)
REMOTE IN
(White/Brown)
8 AUX Audio Input (AUX1) Connectors
9 Remote Control Output Lead (White/Brown)
! RCA Extension Cable (Included with DVD video
" RGB Input Connector
# Ai-NET Cable (Included with CD Changer)
$ Ai-NET Cable (Included with DVD Changer)
% RCA Extension Cable (Included with DVD
& RGB Convertor Cable (KWE-503N) (Sold
(not used for this system)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
player)
Connect to the RGB output terminal of the navigation
system.
Changer)
Separately)
To"
(Yellow/Red)
(White/Green)
(White/Brown)
&
51
-EN