Switching Phase; Turning Defeat Mode On And Off - Alpine CVA-1003 Mode D'emploi

Other Useful Features
bass engine
Selected Preset Number
Setting items of the
Display Setting
Mode

Switching Phase

Before switching Phase, select the Subwoofer ON
(refer to "Subwoofer Control On and Off" on page
38).
1
Press the bass engine button to turn on the
Bass engine mode.
2
Press the Preset 3 button to select Subwoofer
Phase mode.
3
Press the g DN or f UP button to switch
the phase of the subwoofer output.
NORMAL ↔ REVERSE
4
Press the bass engine button to return to the
normal mode.
NOTE
If no buttons are pressed within 10 seconds, the
Switching Phase setting will be off automatically.
30
-EN
All manuals and user guides at all-guides.com
SETUP
g g DN g
g g
f UP f f f f
Example of SETUP Screen
Volume Level
Preset 1
Preset 3
Current Time

Turning Defeat Mode On and Off

When the defeat mode is on, the sound signals
bypass the surround circuits and directly go to the
line output. The equalizer curve, therefore,
becomes flat.
1
Press and hold the bass engine button for at
least 2 seconds to select the DEFEAT the mode.
2
Press the g DN or f UP button to set
DEFEAT to ON/OFF.
3
When turning DEFEAT ON, you can return the
settings that you adjusted to the default settings.
DEFAULT:
Bass Level
Bass Center Freq. : 80 Hz
Bass Band Width
Treble Level
Treble Center Freq. : 10.0 kHz
LOUD
4
Press and hold the bass engine button for at
least 2 seconds to return to normal mode.
Selected Mode
Setting/Adjusting status
: ± 0
: WIDE1
: ± 0
: OFF