Hewi 801 Serie Instructions De Montage page 5

Warnhinweise | Warning | Mises en garde | Let op | Avvertenze importanti | Ostrzeżenia
WARNING!
Use of HEWI wall mounted seat with lift-up feature
The HEWI wall mounted seat with lift-up seat feature is designed to withstand a maximum sta-
tic working load of 150 kg (vertical). Do not use this wall mounted seat for weights in excess of
this. Any non-compliance with loading limits can cause permanent damage to the wall mounted
seat or the joint. In such cases, the wall mounted seat must be examined by the company
appointed to carry out maintenance work prior to the wall mounted seat being used again. If in
doubt, contact HEWI's after-sales service team (sanitary) on tel. +49 5691 82-300 for further
assistance.
Only use the HEWI wall mounted seat with lift-up feature in the manner described in the instruc-
tions. Any improper use e.g. as a climbing aid can cause an accident with persons potentially
suffering serious injury.
Assuming normal use, the wall mounted seat is of a flexible nature thanks to the materials used
in its manufacture. This flexibility reduces the risk of injury if anyone bumps into the wall moun-
ted seat . The fact that the wall mounted seat bends to a certain extent under load is normal.
Should however the support become permanently deformed, you should immediately contact
the company appointed to carry out maintenance work or HEWI's after-sales service team (sani-
tary) on tel. 01634 269599.
Installation of HEWI wall mounted seat with lift-up feature
The smooth and safe functioning of the HEWI wall mounted seat with lift-up feature largely
depends on its correct fixing to the given wall, which is why this work should only be entrusted
to a licensed contractor (sanitary fitter). Serious impairment to the wall mounted seat 's proper
functioning can occur if its installation is not carried out professionally, potentially resulting in acci-
dents with persons suffering serious injury. This is why we advise you not to install the wall moun-
ted seat yourself.
When the licensed contractor mounts the HEWI wall mounted seat with lift-up feature, he should
ensure that the entire area of the wall to which the wall mounting plate is to be fitted is flat (no
projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation
of the wall mounted seat and has no weak points. Furthermore, the choice of the right fixing
material kit for the job is important; HEWI offers various types to suit the nature of the wall con-
cerned. If in doubt, contact HEWI's after-sales service team (sanitary) on tel. +49 5691 82-300
for further assistance. The instructions accompanying the wall plugs should be observed in full.
HEWI | 5