Case 3 : Component Video Output Jacks; Other Type Of Connecting The Audio Output Cable; Case 1 : Connecting To Your Tv - Samsung DVD-HR749 Manuel D'instructions

Case 3 : Component Video output
jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y, P
on HDD & DVD RECORDER and COMPONENT
IN(Y, P , P ) jacks on your TV.
B R
• You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
and AUDIO IN jacks on TV (or AV amplifi er).
(See pages 21~22).
3. After connecting, refer to the pages 33~34.
Green
Blue
Red
M

Make sure that the colour coded connections
match. The Y, P , P
B
of your HDD & DVD RECORDER must be
connected to the exact corresponding
component input jacks on your TV.

Progressive setting is only available when the
Video Out is set to Component.
(See pages 33~34)
, P ) jacks
B R
component output jacks
R
English - 21
Other type of connecting the Audio
output cable
There are several ways to output audio signal not
using scart cables. Select the audio connection
that best suits you below.
•

Case 1 : Connecting to your TV

• Case 2 : Connecting to a stereo amplifi er with AV
output jacks
• Case 3 : Connecting to an AV amplifi er with a digital
output jack
Manufactured under licence from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of
DTS, Inc.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Yellow
White
Red