Activating And Deactivating Bluetooth® Radio Interface; Assembling The Battery - Stihl AR 2000 L Notice D'emploi

7 Activating and Deactivating Bluetooth® Radio Interface
► If the charger (5) is no longer required. Dis‐
connect the mains plug (7) from the wall outlet
(8).
6.2 Displaying State of Charge
► Press the button (1).
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge. There is a
short beep.
► If the right-hand LED flashes green and there
are six long beeps: Charge the battery.
6.3 LEDs and Beeps
The LEDs and beeps can indicate the following
information about the battery:
– State of charge
– Activation and deactivation of Bluetooth®
interface.
– Malfunctions
The LEDs can glow or flash green or red. The
right-hand LED can also glow or flash blue.
Beeps may be short or long.
The state charge is indicated when the LEDs
glow or flash green and there is a short beep.
► If the right-hand LED flashes green and there
are four long beeps: Charge the battery.
► If the LEDs glow or flash red or there are no
beeps: Rectify the malfunction.
There is a malfunction in the cordless product
or battery.
► If the four right-hand LEDs on the battery flash
red and short beeps sound in quick succes‐
sion: Troubleshooting,
There is a malfunction in the battery.
If the right-hand LED on the battery glows blue
and there are three short beeps: The Bluetooth®
radio interface on the battery is activated,
If the right-hand LED on the battery flashes blue
and there are three short beeps: The Bluetooth®
radio interface on the battery is deactivated,
7.2.
0458-820-9921-B
100 % 0 %
19.1
19.1.
7.1.
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► Press the button and hold it depressed for
about 3 seconds.
The right-hand LED glows blue for about 3
seconds. You will hear 3 short beeps. The
Bluetooth® radio interface on the battery is
activated.
7.2
Deactivating the Bluetooth
Radio Interface
► Press the button and hold it depressed for
about 3 seconds.
The right-hand LED flashes blue six times.
You will hear 3 short beeps.
8

Assembling the Battery

8.1 Fitting the Connecting Cable
2
► Position the connector (1) with the connecting
cable facing up.
► Insert the connector (1) in the socket (2).
8.2 Fitting and Removing Battery
and Cable on Carrying System
8.2.1 Fitting Battery and Cable on Carrying
System
► Insert the connector (1).
English
Radio
®
®
1
1
23