Leds And Beeps; Activating And Deactivating Bluetooth® Radio; Interface; Activating The Bluetooth Radio Interface - Stihl AR 2000 L Notice D'emploi

7 Activating and Deactivating Bluetooth® Radio Interface
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge. There is a short beep.
► If the right-hand LED flashes green and there are six long
beeps: Charge the battery.
6.3

LEDs and Beeps

The LEDs and beeps can indicate the following information
about the battery:
– State of charge
– Activation and deactivation of Bluetooth® interface.
– Malfunctions
The LEDs can glow or flash green or red. The right-hand
LED can also glow or flash blue. Beeps may be short or long.
The state charge is indicated when the LEDs glow or flash
green and there is a short beep.
► If the right-hand LED flashes green and there are four long
beeps: Charge the battery.
► If the LEDs glow or flash red or there are no beeps: Rectify
the malfunction.@ 19.1
There is a malfunction in the cordless product or battery.
► If the four right-hand LEDs on the battery flash red and
short beeps sound in quick succession: Troubleshooting,
@ 19.1.
There is a malfunction in the battery.
If the right-hand LED on the battery glows blue and there are
three short beeps: The Bluetooth® radio interface on the
battery is activated, @ 7.1.
If the right-hand LED on the battery flashes blue and there
are three short beeps: The Bluetooth® radio interface on the
battery is deactivated, @ 7.2.
0458-820-9921-A
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1 Activating the Bluetooth
► Press the button and hold it depressed for about 3
seconds.
The right-hand LED glows blue for about 3 seconds. You
will hear 3 short beeps. The Bluetooth® radio interface on
the battery is activated.
7.2 Deactivating the Bluetooth
► Press the button and hold it depressed for about 3
seconds.
The right-hand LED flashes blue six times. You will hear 3
short beeps.

8 Assembling the Battery

8.1

Fitting the Connecting Cable

2
► Position the connector (1) with the connecting cable facing
up.
► Insert the connector (1) in the socket (2).
English
®
Radio Interface
®
Radio Interface
1
35