Adjusting Battery For User - Stihl AR 2000 L Notice D'emploi

English
2 3
► Position the battery (2) on the carrying system
(3) so that the guides on the carrying system
engage the recesses in the battery.
1
5
2
► Open the lever (4) and hold it there.
► Press the carrying system (3) against the bat‐
tery (2) until the connector (1) locates against
the socket (5).
► Swing the lever (4) down. It must snap into
place.
8.2.2 Removing Battery and Cable from
Carrying System
► Open the lever.
► Remove the battery.
► Remove the connector.
9

Adjusting Battery for User

9.1 Adjusting Carrying System to
Suit User's Height
The carrying system can be set to positions S, M
or L to suit the user's height.
24
4
3
4
1
► Depress the locking tab (1) and push it in
direction of arrow.
► Remove the slide (2).
2
4
► Line up mark (3) with mark (4).
► Fit the slide (2).
► Pull the slide (2) up (in opposite direction to
arrow).
The slide (2) engages with a click.
► Set slide (2) to same position on left and right
shoulder straps.
9.2 Fitting and Adjusting the Con‐
necting Cable
The connecting cable can be fitted and adjusted
to suit the user's height, different cordless prod‐
ucts and the application.
1
2
2
The connecting cable can be secured in position
by the guide (1) on the harness and the fasten‐
ers (2), or on the side of the backplate with the
fasteners (2).
9 Adjusting Battery for User
2
2
3
2
2
0458-820-9921-B
2
2