Function "Pir Recording - Conrad Electronic Sygonix 1486624 Notice D'emploi

c) Function "PIR recording"
The screen/DVR records the camera image only when the PIR sensor recognises a temperature change in the
recording area.
The PIR sensor does not react to a pure movement, but to a temperature change in the recording area, e.g.
when a person walks into the recording area; see chapter 8.b).
• After calling the function, you can separately activate the recording for each of the four possible radio cameras (one
is enclosed, up to three more can be ordered as accessories).
• Select the desired radio camera (channel) with the control buttons "
• Use the control buttons "
• Save the setting with the button "OK" (8); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (5). The display
will switch back to the prior menu.
" or " " to switch the recording on or off.
" or " "; it is highlighted in colour.
75