Submenu "Record; Function "Timer Recording - Conrad Electronic Sygonix 1486624 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12. Submenu "Record"

• As described in chapter 10, briefly push the button "MENU" (5) to call the OSD menu. Then use the control buttons
"
" or "
" to select the corresponding submenu and push the button "OK" (8) to confirm.
• Use the control buttons "
• To return to the prior menu or to leave the OSD menu, briefly push the button "MENU" (5) (repeatedly if necessary).
a) Function "Timer recording"
The screen/DVR can record the camera image automatically at specific times, e.g. on weekend nights from midnight
to 6 AM or during the day from 8 AM to 4 PM.
Several schedules for the time-controlled recording can be programmed. However, observe that these
times do not overlap.
Setting up/changing the schedule
• After the first call of the function, a few schedule can be set up. If schedules have already been set up for time-
controlled recordings, they appear in a list below.
• Use the control buttons "
"OK" (8) to get to the setting window.
• Use the control buttons "
with the control buttons "
You can make the following settings in sequence:
- Select whether the signal of a single camera (1, 2, 3 or 4) or of all cameras is recorded
- Set the recording period (date of one of the following days, only on working days, only on weekends, only on a
specific day or on every day)
- Time for starting the recording
- Time for ending the recording
• Save the selection with the button "OK" (8); then you will leave setting mode again. To cancel, use the button
"MENU" (5) as usual.
Delete schedule
• Select one of the schedules set up by you with the control buttons "
• Briefly push the "AV" (7) button to delete the selected schedule. To cancel, use the button "MENU" (5) as usual.
" or "
" to select the desired function now. Confirm the selection with "OK" (8).
" or "
" to select the desired schedule (or set up a new schedule) and use the button
" or "
" to switch between the different setting options now and to change the values
" or "
".
" or "
"; it is highlighted in colour.
73

Publicité

Table des Matières
loading

Table des Matières