Submenu "System; Function "Network; Function "Date/Time - Conrad Electronic Sygonix 1486624 Notice D'emploi

11. Submenu "System"

• As described in chapter 10, briefly push the button "MENU" (5) to call the OSD menu. Then use the control buttons
" " or " " to select the submenu and push the button "OK" (8) to confirm.
• Use the control buttons "
• To return to the prior menu or to leave the OSD menu, briefly push the button "MENU" (5) (repeatedly if necessary).
a) Function "Network"
The delivery includes a docking station with a network connection. Contacts (11) on the bottom of the screen/DVR
establish the connection when the screen/DVR is pushed into the docking station.
Connect the RJ45 connection on the rear of the docking station to a free connection on your router or a network
switch with a 1:1 connected network cable. Use either the enclosed network cable or a different network cable of the
same build.
Connect the screen/DVR to a router as directly as possible. If there are several network switches between
the screen/DVR and the router, there may be faults.
The use of DHCP is pre-set in the screen/DVR. If your network contains a DHCP server (integrated in nearly any
router) and this is switched on, each device will automatically receive its IP address in the network. If you use fixed IP
addresses, you need to assign the screen/DVR a dedicated (unique) IP address as well.
• After calling the function, you can select the different subfunctions with the control buttons "
• Push the "OK" (8) button to make a setting of the subfunction.
• Make the settings accordingly (the password will later be used for connecting to the App).
Chapter 16 provides more information in connection with an Android device; chapter 17 provides informa-
tion on iOS.
• Save the setting with the button "OK" (8).
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (5). The display
will switch back to the prior menu each time.
b) Function "Date/Time"
• After calling the function, use the control buttons "
hour and minute.
• Change the displayed value with the control buttons "
• Save the settings with the button "OK" (8); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), briefly push the button "MENU" (5). The display
will switch back to the prior menu.
" or " " to select the desired setting function now. Confirm the selection with "OK" (8).
" or " " to switch between the settings for year, month, date,
" or " ".
" or " ".
67